The process of waxing a car can be significantly accelerated with electric buffers. Additionally, they enable more paint shine and uniform wax application, giving your vehicle the stunning appearance you’ve always desired.
Waxing cars doesn’t always require the use of an electric buffer because you can still buff by hand, but the task is made simpler and takes less time with its assistance. At first, the idea of using an electric buffer for waxing could seem a little scary, but as you become more comfortable with the tool and the procedure, you’ll see that it’s actually a simple and rewarding task.
An Instructional Step-by-Step Guide for Waxing a Car Using a Buffer
You should be able to wax a car twice as quickly with a machine buffer. It can save you more time than manually waxing, making it the more useful option.
A wax applicator pad, a wax removal cloth, a machine buffer, liquid wax, and microfiber towels are some of the supplies you’ll need. Compile these items before you begin the operation. Once you’ve taken care of everything listed above, follow the instructions below to give your car the best shine possible.
Step #1: Locate a Shaded Area to Work in
The sun is not your friend when you are waxing. The sun can make the wax dry out too soon before you’ve even finished applying it, which can lead to a variety of issues. You should work in the shade, ideally in a garage, where you won’t have to be concerned about any of the potential drawbacks associated with waxing outside.
Step #2: Clean the Surface of the Car
Make careful to thoroughly wash your vehicle before you start waxing it. Then, use a clay bar to remove any dirt and debris that has become lodged.
How to Use the Clay Bar?
Image Credits: Fortador-usa.com
Work on small sections of the car at a time, using a clay lubricant to help the clay bar glide over the surface. Gently rub the clay bar over the surface, using a back-and-forth motion, until the clay bar glides smoothly over the surface. Once the clay bar starts to feel gritty, fold it and knead it to reveal a clean surface, then continue working on the next section of the car. Once the entire car has been clay barred, wipe the surface with a microfiber towel to remove any remaining clay lubricant and inspect the surface for any remaining debris. Repeat the process if necessary.
This will make the paint feel and look as smooth as glass, which is how it should feel and look prior to applying wax. Before moving on to the following stage, make sure the car is entirely dry and that there are no soapy traces left behind.
Step #3: Use Liquid Wax
Connect the wax applicator to the machine buffer’s buffer pad. Next, using vertical or horizontal linear motions, apply wax to your car without turning on the buffer. Finally, activate the buffer and use it to carefully apply wax to the whole surface of your car. Never overpress the buffer; this will prevent you from unintentionally damaging the paint.
With no weight behind it, the buffer should move smoothly across the surface of your car. The metal should flow in the same direction to enable a flawless application. When you’re finished, let the wax dry completely to give your car a hazy appearance.
Step #4: Polish the Surface of the Car
Replace the wax applicator pad with a wax removal towel after removing it from the buffer. To remove the wax, turn on the machine and use long, linear strokes with little pressure. When buffing, avoid using circular motions as this may cause swirl marks to appear on the surface of your car.
Being able to direct the instrument while letting it do the task on its own is essential for success. You shouldn’t have too much trouble buffing your car if you keep this in mind.
Various Machine Buffers are Available
The dual-action orbital polisher and the variable-speed rotary polisher are the two primary types of buffers available on the market. We will discuss their advantages and disadvantages as well as the various levels of competence needed to use them.
1. Rotary Polisher with Variable Speed
The variable-speed rotary polisher may not be the best choice if you have never used a machine buffer before. Although this equipment is excellent at eliminating swirl marks, significant scratches, and other sorts of severe damage, it also makes it simple for beginners to harm the car’s surface by using excessive pressure.
2. Polisher with Dual-Action Orbits
Here is one that is ideal for newcomers. The dual-action orbital polisher is simpler to use and control than its counterpart because it spins properly in both directions. Because you don’t feel the need to apply excessive pressure, it’s ideal for waxing.
If you aren’t working with a surface on your car that has been severely damaged, auto detailing enthusiasts advise employing this gadget. The dual-action orbital polisher can work for you if your car is well-maintained and has few scratches.
The Final Verdict
Using a machine buffer to wax a car not only makes the task much simpler but also guarantees even wax distribution and amazing results. If you haven’t tried it yet, we advise you to do so on the following waxing appointment. Until then, start becoming familiar with the procedure, educate yourself on the many electric buffer types available, and review our simple, step-by-step instructions for using a buffer to wax your car.
Sources:
https://Turtlewax.com/blogs/how-to/how-to-wax-a-car-properly
https://Carcleaningguide.com/waxing-car-with-buffer/
https://Forbes.com/wheels/accessories/best-buffers-and-polishers/
